Duplicate BBMDs: How to identify, troubleshoot, and resolve them

Solving duplicate BBMDs on BACnet networks with Visual BACnet
mini webinar duplicate BBMds optigo networks visual bacnet

A BBMD, or BACnet broadcast management device, sends a unicast message from one BACnet or IP device on a subnet to other subnets. Once the message gets to the destined subnet, the message is rebroadcast. A duplicate BBMD is where multiple devices on the same network are set as BBMDs, and are rebroadcasting the same messages.

The reason duplicate BBMDs are so dangerous, is they can increase the amount of traffic by double or more. The network gets more traffic, and the BBMD at the other end gets more traffic. This can take down a network entirely, making it inaccessible. Duplicate BBMDs are caught by Visual BACnet in the “Duplicate BBMD” diagnostic check.  It identifies single device IDs receiving the same information from multiple sources.

A duplicate BBMD is normally caused by a setup issue, typically on a mixed vendor site. On a new site, the first vendor sets up multiple networks and connects them with BBMDs. A site upgrade or change takes place, a new vendor wins the contract, and they add devices to each network. In order to connect the devices, they put a BBMD on each subnet. This can continue, resulting in two, three or more BBMDs on each subnet, and double or triple the traffic.There should only be one BBMD per network.

To resolve the problem, start by:

  1. Finding all the problem vendors using the IP addresses, vendor identifier, and MAC address in Visual BACnet.
  2. Isolating networks if you don’t need integration.
  3. If not, assigning one vendor and their BBMDs to the task.

A good rule of thumb is to use one vendor’s BBMD, as it’s easier to make site-wide changes. Learn more in the webinar recording!

Recent Blog Posts

You’re in the design phase of a new building. Contractors and vendors are all coming at you with demands.

The consulting specifying engineer of today is venturing into totally new territory: Division 25.

If you’re tired of going on site to capture BACnet data, look no further than your JACE.

OT Networks Overview

The latest release from Visual BACnet brings huge convenience and time saving for users with JACE controllers.

Recent Projects

Coventry University

COVENTRY UNIVERSITY

Chris Goodman, the Senior BMS Technician at Coventry University, had broadcast storms that were happening more and more frequently. 

Ongoing construction due to Coventry’s campus expansion meant lots of new activity, with technicians installing new devices and making network changes. Already juggling these constant additions and alterations, Goodman and his small team then had to deal with the subsequent broadcast storms. As the broadcast storms became more frequent, Goodman and his team needed a solution.

Find out how Visual BACnet helped Chris solve the broadcast storms and improve Network Health in our free case study!

Data center expansion with OTI and Optigo Connect

DATA CENTER EXPANSION

Stack Infrastructure is a portfolio of hyperscale computing data centers. OTI completed work on Phases I and II, and returned for the Phase III build-out of a 4-megawatt data hall and brand new central plant. The Optigo Connect network put in place in Phases I and II was expanded on this project. The team achieved quick roll-out of a large, multi-service redundant network using the Optigo OneView management interface. Going forward, the facility management team can use OneView to remotely monitor equipment, manage power usage, and meet up-time goals.

Optigo Connect MR Soluciones The Landmark

THE LANDMARK

The Landmark is a sophisticated mixed-use high-rise in Mexico. The owners wanted to integrate all OT systems in the skyscraper, while maintaining separate networks for each application. The Landmark is the fourth joint project between Optigo Networks and MR Soluciones. Together, these companies provide robust services to meet any challenge.

Australian Bureau of Statistics at 45 Benjamin Way with Delta Building Automation

45 BENJAMIN WAY

Delta Building Automation (Australia) had a big job renovating the Headquarters for the Australian Bureau of Statistics (ABS) at 45 Benjamin Way. The building owner wanted to improve the building’s energy use and increase their National Australian Built Environment Rating System (NABERS) score to more than 4.5 stars, out of a possible total of six. Securing the network both internally and externally was a big priority, as well.

Penn State University Optigo Networks Visual BACnet

PENN STATE UNIVERSITY

When Tom Walker looked at Penn State University’s Navy Yard network, he saw huge issues. The system was busy and loud, to the point where the overrun network was bringing down the entire building. Because this was happening on the MS/TP network, pinpointing the problem would mean boots on the ground to segment and test the chain, piece by piece.

Penn State University Optigo Networks Visual BACnet

PENN STATE UNIVERSITY

When Tom Walker first started working at Penn State University four years ago, there were a lot of network issues. Buildings were dropping offline. Broadcast traffic was pushing 90,000 packets per hour. Walker was on the phone almost every single night because devices were down or had to be reset.

 

Torre Manacar Mexico City Optigo Connect

TORRE MANACAR

When MR Soluciones began work on Torre Manacar, they knew they needed a flexible and scalable network infrastructure to support a wide array of integrated systems. Optigo Networks was a natural fit for the massive project, designing a robust network at a competitive cost.

short

SHORT PUMP TOWN CENTER

Short Pump Town Center, an upscale retail center, underwent a complete renovation in 2014. The flexibility of Optigo Networks’ solution meant the retail center’s unknown final design was not a barrier to placing IP surveillance equipment in the field.

BOULEVARD MALL

BOULEVARD MALL

Optigo Networks connected New York-based Boulevard Mall’s security surveillance devices in December 2015, using a Passive Daisy Chain topology.

Visual BACnet tech support team

TECH SUPPORT TEAM

One tech support team at a manufacturer purchased an account with Visual BACnet in April 2017, for technical problems around the world.